EDAN ES3 Vital Signs Monitor

The EDAN ES3 is a compact, spot-check vital signs monitor designed for routine patient assessment, ward rounds, and outpatient clinics. It pairs a 7-inch color touchscreen (1024 × 600) with a fanless, 2 kg enclosure that tilts to 105° for bedside viewing, and includes EDAN SpO₂, pulse rate, perfusion index (PI), and EDAN NIBP with RRp as standard—alongside a built-in 2,550 mAh lithium-ion battery and non-volatile memory for up to 5,000 measurement sets.

The ES3 is designed for adult, pediatric, and neonatal patients and supports two workflow modes: spot-checking and ward-round mode. The NIBP function uses EDAN’s iFAST™ algorithm, with measurement completed in approximately 15 seconds, and the device also reports mean arterial pressure (MAP) and respiratory rate derived from the plethysmographic signal (RRp). The enclosure is compatible with 31 commonly used disinfectants, supporting routine cleaning between patients, and the fanless design eliminates operating noise and internal dust accumulation.

The ES3 ships standard with a reusable adult SpO₂ finger sensor, reusable adult NIBP cuff (27–35 cm), power adapter, 2,550 mAh lithium-ion battery, and user manual. Optional configurations include EDAN Quick Temp or Covidien Quick Temp, infrared ear or forehead thermometers, a thermal recorder, built-in Wi-Fi and Bluetooth, Ethernet (RJ45), a barcode scanner, and MT-206 or MT-300 rolling stands.

Regulatory status: The ES3 is a vital signs monitor intended for clinical use. No FDA 510(k) clearance specific to the “ES3” model name was identified in the public FDA database during preparation of this page; Edan’s K180380 clearance (December 21, 2018) covers a Class II vital signs monitor (product code DQA, 21 CFR 870.2700) by Edan Instruments, but the trade name in that clearance is not confirmed as ES3. A CE RED certificate (GML2509308021-W) has been issued for the ES3, covering radio, EMC, and health requirements under the Radio Equipment Directive; this is not a medical device CE certificate under EU MDR. No independent peer-reviewed clinical validation study specific to the ES3 was identified in the public literature during preparation of this page. Availability, labeling, and cleared claims vary by market; confirm local registration and intended use before purchase.

The ES3 is built for clinics, wards, and outpatient departments that need a portable, touch-operated vital signs monitor with spot-check and ward-round modes, extended battery life, and flexible temperature and connectivity options—without the footprint or power dependency of a full bedside monitor.

Key Features & Benefits

7-Inch Touchscreen with Spot-Check and Ward-Round Modes

The 7-inch color touchscreen (1024 × 600) provides a clear, responsive interface for spot-checking (single measurement) and ward-round mode (sequential measurements across patients). The 105° tilt supports comfortable viewing from a standing or seated position beside the patient, and the fanless enclosure keeps operation silent during use.

Standard EDAN SpO₂, PR, PI, NIBP, and RRp

The ES3 includes EDAN SpO₂ (with pulse rate and perfusion index) and EDAN NIBP (with mean arterial pressure) as standard, alongside RRp—a respiratory rate derived from the plethysmographic signal. The iFAST™ NIBP algorithm is designed to complete measurement in approximately 15 seconds, supporting efficient workflows during rounds.

Up to 24 Hours of Battery with Optional High-Capacity Pack

The standard 2,550 mAh lithium-ion battery supports more than 12 hours of operation. An optional 5,100 mAh battery extends runtime to up to 24 hours, supporting full shifts and mobile use without mains power. The built-in non-volatile memory stores up to 5,000 measurement sets, supporting later review and record transfer.

Flexible Temperature Options

The ES3 supports a range of optional temperature measurement modules: EDAN Quick Temp, Covidien Quick Temp, infrared ear thermometer (RADIANT THP59J), and Hetaida infrared forehead thermometer (CE or FDA versions). This allows a clinic to standardize on the thermometry method that fits its workflow, rather than purchasing a separate device.

Optional Wi-Fi, Bluetooth, Ethernet, HL7, and Barcode Scanner

Connectivity options include built-in Wi-Fi and Bluetooth, Ethernet (RJ45), direct HL7 support, and barcode scanner compatibility, supporting transfer of vital signs data to electronic medical records (EMR) where the infrastructure exists. A thermal recorder is available as an option for hard-copy documentation.

Disinfectant-Compatible Enclosure and Rolling Stand Options

The ES3 enclosure is compatible with 31 commonly used disinfectants, supporting routine cleaning between patients. Optional MT-206 and MT-300 rolling stands with quick-release mounting allow the monitor to be configured for cart-based ward use or bedside deployment as clinical needs require.

Technical Specifications

Why Choose the EDAN ES3?